香港專上院校所提供之論文/研究刊物

關鍵字

以下資料由與建造業議會簽署合作備忘錄的專上學院提供。

院校

類型

Date: From

To

院校 題目 類型 日期 作者 摘要 網頁
HKUST A framework for 3D traffic noise mapping using data from BIM and GIS integration Journal 01/2016 Deng, Y., Cheng, J.C.P., and Anumba, C.J. Traffic noise is a major health concern for people living in urban environments. Noise mapping can help evaluating the noise level for certain areas in a city. Traditionally, noise mapping is performed in 2D geographic information system (GIS). The use of 3D GIS is also emerging in noise mapping in recent years. However, the current noise-mapping platforms can only conduct noise evaluation for the outdoor environment and the indoor environment separately. In addition, related information about absorption coefficient and transmission loss (TL) in noise calculation is not properly retrieved and is often replaced with a single value. In this research, building information modelling (BIM) and 3D GIS are integrated in order to combine traffic noise evaluation in both outdoor environments and indoor environments in a single platform. In our developed BIM–GIS integration platform, the built environment is represented in a 3D GIS model that contains information at a high level of detail from BIM. With the integration with BIM, the 3D GIS model now has access to detailed indoor features such as interior walls and interior rooms. Noise evaluation could therefore be performed at a room level in the developed platform. Essential parameters such as absorption coefficient and TL can be extracted directly from BIM for noise calculation. The 3D GIS model is connected with detailed BIM so that any changes in the indoor and outdoor features can be reflected to each other. The Italian C.N.R model is modified and applied in the platform to conduct noise calculation. This paper presents the details for the development of the noise-mapping BIM–GIS platform based on ArcGIS. Two use cases were analysed to show the role of such platform in the decision-making process of both urban planning and interior design. 連結
HKUST Quantification of construction and demolition waste prevented by BIM-based design validation: Case studies in South Korea Journal 01/2016 Won, J., Cheng, J.C.P., and Lee, G. Waste generated in construction and demolition processes comprised around 50% of the solid waste in South Korea in 2013. Many cases show that design validation based on building information modeling (BIM) is an effective means to reduce the amount of construction waste since construction waste is mainly generated due to improper design and unexpected changes in the design and construction phases. However, the amount of construction waste that could be avoided by adopting BIM-based design validation has been unknown. This paper aims to estimate the amount of construction waste prevented by a BIM-based design validation process based on the amount of construction waste that might be generated due to design errors. Two project cases in South Korea were studied in this paper, with 381 and 136 design errors detected, respectively during the BIM-based design validation. Each design error was categorized according to its cause and the likelihood of detection before construction. The case studies show that BIM-based design validation could prevent 4.3–15.2% of construction waste that might have been generated without using BIM. 連結
HKUST A BIM-based system for demolition and renovation waste estimation and planning Journal 03/2013 Cheng, J.C.P., and Ma, L.Y.H. Due to the rising worldwide awareness of green environment, both government and contractors have to consider effective construction and demolition (C&D) waste management practices. The last two decades have witnessed the growing importance of demolition and renovation (D&R) works and the growing amount of D&R waste disposed to landfills every day, especially in developed cities like Hong Kong. Quantitative waste prediction is crucial for waste management. It can enable contractors to pinpoint critical waste generation processes and to plan waste control strategies. In addition, waste estimation could also facilitate some government waste management policies, such as the waste disposal charging scheme in Hong Kong. Currently, tools that can accurately and conveniently estimate the amount of waste from construction, renovation, and demolition projects are lacking.

In the light of this research gap, this paper presents a building information modeling (BIM) based system that we have developed for estimation and planning of D&R waste. BIM allows multi-disciplinary information to be superimposed within one digital building model. Our system can extract material and volume information through the BIM model and integrate the information for detailed waste estimation and planning. Waste recycling and reuse are also considered in our system. Extracted material information can be provided to recyclers before demolition or renovation to make recycling stage more cooperative and more efficient. Pick-up truck requirements and waste disposal charging fee for different waste facilities will also be predicted through our system. The results could provide alerts to contractors ahead of time at project planning stage. This paper also presents an example scenario with a 47-floor residential building in Hong Kong to demonstrate our D&R waste estimation and planning system. As the BIM technology has been increasingly adopted in the architectural, engineering and construction industry and digital building information models will likely to be available for most buildings (including historical buildings) in the future, our system can be used in various demolition and renovation projects and be extended to facilitate project control.
連結
HKUST Transfer learning enhanced AR spatial registration for facility maintenance management Journal 02/2020 Chen, K., Yang, J., Cheng, J.C.P., Chen, W., and Li, C.T. Augmented reality (AR), which requires a spatial registration technique, has proved to greatly improve the efficiency of facility maintenance management (FMM) activities. Being one of the most promising techniques for indoor localization, Wi-Fi fingerprinting has been widely used for AR spatial registration. However, localization accuracy of Wi-Fi fingerprinting decreases over time due to dynamics of environmental factors. Readings from different mobile devices can also affect the accuracy negatively. In this paper, a transfer learning technique named transferable CNN-LSTM is proposed for improving the robustness of Wi-Fi fingerprinting while implementing AR in FMM activities. Convolutional neural network (CNN), embedded with long short term memory (LSTM) networks, is utilized to predict the location of unlabeled fingerprints. Multiple kernel variant of maximum mean discrepancy (MK-MMD) is adopted to reduce the distribution difference between the source domain and the target domain, so that the location of the newly collected unlabeled fingerprints can be predicted accurately. As shown in the experimental validation, the transferable CNN-LSTM can achieve an accuracy of 97.1% in short-term (without significant environmental changes) spatial registration, 87.8% in long-term (with significant environmental changes) spatial registration, and around 90% in multi-device spatial registration, indicating a higher accuracy and better robustness over other conventional approaches. 連結
HKUST Semi-automated generation of parametric BIM for steel structures based on terrestrial laser scanning data Journal 01/2020 Yang, L., Cheng, J.C.P., and Wang, Q. As-built building information models (BIMs) are increasingly needed for construction project handover and facility management. To create as-built BIMs, laser scanning technology has gained popularity in the recent decades due to its high measurement accuracy and high measurement speed. However, most existing methods for creating as-built BIMs from laser scanning data involve plenty of manual work, thus becoming labor intensive and time consuming. To address the problems, this study presents a semi-automated approach that can obtain required parameters to create as-built BIMs for steel structures with complex connections from terrestrial laser scanning data. An algorithm based on principal component analysis (PCA) and cross-section fitting techniques is developed to retrieve the position and direction of each circular structural component from scanning data. An image-assisted edge point extraction algorithm is developed to effectively extract the boundaries of planar structural components. Normal-based region growing algorithm and random sample consensus (RANSAC) algorithm are adopted to model the connections between structural components. The proposed approach was validated on a bridge-like steel structure with four different types of structural components. The extracted as-built geometry was compared with the as-designed geometry to validate the accuracy of the proposed approach. The results showed that the proposed approach could efficiently and accurately extract the geometry information and generate parametric BIMs of steel structures. 連結
HKUST Automatic generation of fabrication drawings for facade mullions and transoms through BIM models Journal 07/2019 Deng, M., Gan, V.J.L., Singh, J., Joneja, A., and Cheng, J.C.P. Fabrication drawings are essential for manufacturing, design evaluation and inspection of building components, especially for building façade structural components. In order to clearly represent the physical characteristics of the façade structural components, a large number of section views need to be produced, which is very time-consuming and labor intensive. Therefore, automatic generation of fabrication drawings for building façade components (such as mullions and transoms) is of paramount importance. In this paper, attempts have been made to develop an efficient framework in order to automatically generate fabrication drawings for building façade structural components, including mullions and transoms. To represent the complex physical characteristics (such as holes and notches) on mullions and transoms using minimum number of drawing views, a computational algorithm based on graph theory is developed to eliminate duplicated section views. Another methodology regarding the generation of breaks for top views is also proposed to further improve the quality of drawing layouts. The obtained drawing views are then automatically arranged using a developed approach. In addition, primary dimensions of the drawing views focusing on the physical features are also generated. Furthermore, in order to maintain the consistency of drawing formats across multiple drawings, a methodology is proposed to determine the scaling factors of the drawings by using clustering technique. In an illustrative example, the proposed framework is used to generate the fabrication drawings for a typical BIM model containing façade structural components, and saving in time is observed. 連結