香港专上院校所提供之论文/研究刊物

关键字

以下资料由与建造业议会签署合作备忘录的专上学院提供。

院校

类型

Date: From

To

院校 题目 类型 日期 作者 摘要 网页
HKUST Minimization of Construction Waste through BIM-based Clash Detection and Quantification Report 06/2016 Baoshan KUANG
Pik Kei LAM
Nowadays the construction industry is under pressure to explore effective and efficient techniques and tools to decrease its escalating waste generation. However, the current approaches, techniques and tools focus on separate projects on site and limited effort is invested to put attention on pre-construction waste generation related to design stages. Waste that is induced by improper design accounts for a major proportion of the total construction waste. Therefore, this report aims to develop a BIM-based approach in the aspect of waste minimization.

With the clash detection tool in Navisworks, this report demonstrates the clash classification, resolution and the corresponding waste generation of 3 pairs of general component models of a villa, which are architectural model vs. structural model, structural model vs. mechanical model and mechanical vs. plumbing model. Then, compare the result obtained with BIM and that estimated with the current waste factor approach and find out whether the BIM-based waste minimization can be better realized. Consequently, coordinating the models of each building components with clash detection enables efficient management of construction waste.
N.A.
HKUST Developing a Facility Monitoring and Management Framework for Buildings Based on BIM and Sensor Technologies Report 06/2016 Fehong HE
Jiaying HUANG
Guishan LI
Building Information Modeling (BIM) is a global trend which is gaining significant benefits in facility management. It can reduce cost and time to address building management problems. Currently there is little information on how to realize the benefits from BIM with monitoring the real time state of a building environment.

In this thesis, a sensor based BIM framework is presented for building controlling and management. Building environment, space, equipment and safety information can be captured by unique sensors automatically instead of human detect. We have simulated the sensor installation in a popular BIM software Autodesk Revit, and use HKUST Hall 7 as an example model to perform our platform. We use SQL database to store all the sensor ID because it have a good linkage with BIM model. With the pragmatic sensor management plugin we can realize visualization interface in BIM model to management those sensors and get the specific information. After realize the real time data acquisition, we have researched some relative criteria and build an assessment system for further facility management.
N.A.
HKUST BIM Application for Construction and Demolition Waste Minimization Report 06/2015 TAO Jiali Nowadays the construction industry is under pressure to explore effective and efficient techniques and tools to decrease its escalating waste production. Many countries have taken initiatives to reduce the construction and demolition waste. However, the current approaches, techniques and tools focus on separate projects onsite and limited effort is invested to put attention on pre-construction waste generation related to supply chain management issues and procurement, design and tender stages.

Therefore this study aims to develop the BIM-based approaches for C&D waste in the aspect of waste estimation, 3R, prefabrication and clash detection. Besides, this study will also demonstrate and validate the developed approaches for C&D waste minimization using example scenarios. All in all, the application of BIM in C&D waste minimization can be better realized. C&D Waste estimation via the quantity takeoff tool and waste index can clearly show the accurate amount of the waste before the commencement of the works. Classifying the different construction material in BIM model and set up suitable C&D waste management planning definitely improve the efficiency of the waste management. Providing accurate information of precast units ahead of time and assisting the supply chain management can be achieved in BIM model. Visual clash detection reduces rework to some extent.
N.A.
HKUST Integration of BIM and GIS for City Planning Report 06/2014 LI Zhi With the popularity of 3D digital maps for computers and mobile phones, the development of 3D city models has grown substantially in the last decades. 3D maps can not only support navigation, but also allow people to perform city planning and architectural and engineering designs with the consideration of the surrounding environment. Moreover, many other advanced applications have been studied to be equipped in 3D models, like disaster management, noise and pollutant diffusion analysis and so on. Earliest research on 3D digital city models was in 1990s and now there are about a total number of 1252 3D digital city models worldwide already.

Since the early 1990’s, lots of researchers have conducted studies in creation, application and maintenance of 3D city models. The study results indicate that the modeling construction techniques and application exploitability has improved significantly in last decades. However, the level of development of existing models varies widely in view of geographic locality (either city or country), creation time and many other factors. A standardized evaluation framework of the existing 3D city models is still in need.

Based on the purpose of setting up an evaluation framework, this review work was conducted. Mainly through literature review and searching on project websites, we collected original sources of more than 70 projects of 3D city models and 23 are chosen for detailed study and analysis. These city models are mainly categorized in four continents (North America, Europe, Asia and Oceania) and in four aspects (model coverage, modeling technology, application and maintenance).

To the point, a preliminary model estimation method is created, considering the maturity of five aspects during modeling procedures, i.e. data capturing, data processing, data storing and managing, data presenting and data updating. According to the evaluation framework, city models can be categorized into four maturity levels as 3D GIS as a Scene, 3D GIS as a Service, 3D GIS as an Infrastructure and 3D GIS as a Platform. Finally, based on the analysis results, some limitations of 3D city models in current situation are summarized, and recommendations of possible resolutions are presented correspondingly.
N.A.
HKUST Mapping of 3D GIS Digital Building Models in CityGML Across Levels of Details (LoD) Report 06/2013 DU Qianru GIS, a traditional technology used in many fields in the past hundreds years, now develops to a new height. With the fast development of 3D GIS technology, many new data formats established based on this kind of technology. Being a new format, CityGML is mainly used to represent the city models. It is really convenient due to the fact that different levels of detail exist in this kind of model format. Different LoDs have different attributes and used in diverse situations. Now, the models are often built in different LoDs. Therefore, to achieve one model which is in different LoDs, a translator needs to be published. However, until now neither OGC standard nor previous researchers provide an efficient translator for the transformation between different LoDs. Furthermore, the detailed definition for different LoDs was not provided either.

Based on these motivations, this project decided to focus on these two goals. The first part of this project focuses on the differences among different LoDs. Based on the differences, a translator is published and its methodology is also shown in the later part of this report. By using the translator established according to the method in this report, a 3D model sample is provided at the end of the report. This project not only provides a tool to realize the translation between different LoDs, but also offers a convenient method for further research.
N.A.
HKU BIM-based Building Approval E-submission in Hong Kong: Prospects and Challenges Thesis 04/2016 HUI Put -- N.A.